Vents and Vent Covers

vents and hatches
 
Omni-Vent  have roof lights with or without 12 volt ventilators. The double glazed roof light has an outer dome made of weatherproof ABS material.

This ABS material can also be used for gluing and silicone. The supplied installation profiles make an installation without drilling possible.

Special Clamps

Gutter on three sides


The roof light is mounted by means of special clamps,
so that drilling through the roof
is not necessary.

Gutter on three sides to prevent water infiltration.
   

Flyscreen and Roller Blind

Integrated Waterproof Hinge

Flyscreen and roller blind
are supplied as standard by Omni-Vent.
 		Integrated waterproof hinge with rail.
Aerodynamic design through built in spoiler.
 


All materials used are made of weatherproof synthetic material Slide operating mechanism allows a completely free central opening, Built in fixed ventilation provides 100 cm-2 free air flow when closed.

The roof light is equipped with a removable roller blind and flyscreen. The outer dome has an extended outer gutter which drains the water in open position

Technical Data

Technical Diagram
Omni-Vent 12 volt - the powerful 30 cm diameter fan has 10 blades - maximum air circulation is 30 cubic metres per minute - 3 speeds intake and 3 speeds extract.

Omni-Vent 12 volt Electronic has a continuously variable speed adjustment (electronically) and a polarity reversal protection.

Both types meet the CE standard and the maximum consumption is 50 W.
Aperture size 40 cm x 40 cm
Exterior dimensions 46 cm x 47 cm
Height of dome
in closed position		 75 mm
Roof thickness 22-60 mm
Material Dome in reinforced UV resistant polypropylene
Other frame ASA

Installation from 40 mm Onwards

The installation of the Omni-Vent
into roof thicknesses from 40 mm
onwards is simplified
by the guidance pieces.

Inner Frame

Inner frame - Polystyrol
 
 

Sample of Vents
 
Omni-Vent roof light
without 12 volt fan		 Omni-Vent Kit 12 volt
   

Roof Light without 12 volt Fan

12 volt Kit

Double glazed roof light with outer dome
made in weatherproof ABS material.
No need to install an extra spoiler as for other
roof lights due to its aerodynamic shape.
A 12 volt fan can be installed afterwards.

The 12 volt fan can be installed in the existing
roof light by using four screws. The 12 volt kit is available in two versions - one version with three
speeds intake and three speeds extract and one version has a continuously variable speed
adjustment and thermostat.
 
  12volt Thermostat
Min consumption 0.8 AA 0.2 A
Max. consumption 5.0 A 5.0 A
Max. air flow 30 cu m/minute 30/cu m/minute
Diameter fan 300 mm 300 mm
 
   
 

Delivery program Omni-Vent roof lights white or translucent

  1. Omni-Vent roof light without ventilator, including rollo - article # 23300000
  2. Omni-Vent 12 volt, 3 speeds intake, 3 speeds extract - article # 23000000
  3. Omni-Vent 12 volt electronic with continuously variable speed adjustment + thermostat -
    article # 23400000
  4. Kit with specifications as under 2 for installation in existing roof - article # 23015000
  5. Kit with specifications as under 3 for installation in existing roof light - article # 23015100

 

Omni-Vent Covers

 
The New Omni-Vent Cover is a fan and roof light in one! While driving, your roof light can stay open in any weather type while the powerful fan is circulation the air in your vehicle. No superfluous noises as the fan is positioned outside the vehicle. The dome is made of weatherproof ABS. The installation of the Omni-Vent Cover is done without drilling, the aluminium profiles are glued to the roof by using special glue (S1KA221). So, no holes need to be drilled in your roof!

Fan and Roof Light Cover
 
Omni-Cover
 The ideal extension for your roof light
The Omni-Cover made of shock resistant ABS makes sure your roof light can stay open during winter and summer, even in rainy or snowy conditions. Even whilst driving your roof light can stay open. Very light weight : less than 2 kg - suitable for roof lights with exterior dimensions of maximum 470 mm x 470 mm. Omni-Cover Extension
 
For further details on any of the Omni-Vent products, contact MAYTOW